Few questions
Thread Starter
Junior Member
Joined: Feb 2010
Posts: 77
Likes: 0
From: Chicago
Year: 1994
Model: Cherokee
Engine: 4.0L
Does anyone have the part number for the straps that hold the ujoints on the driveshaft? Autozone doesnt have any?
and is is safe to drive without my front driveshaft? I have NP231 TC. Thanks.
and is is safe to drive without my front driveshaft? I have NP231 TC. Thanks.
the stock straps are crap, plain and simple. do this instead: https://www.cherokeeforum.com/f51/re...version-28141/
NAPA part # PUJ43710 $6.99
http://www.napaonline.com/Search/Det...+50038+2038004
If you go on NAPA's website you can search for a local store that might have it in stock.
http://www.napaonline.com/Search/Det...+50038+2038004
If you go on NAPA's website you can search for a local store that might have it in stock.
Thread Starter
Junior Member
Joined: Feb 2010
Posts: 77
Likes: 0
From: Chicago
Year: 1994
Model: Cherokee
Engine: 4.0L
K, got the rear driveshaft ujoints replaced...they were nassssty. Super rusted. I also took out the front driveshaft, Im going to disassemble that over the weekend and get it cleaned up and ready for new ujoints as well. Gonna do the pinion seal too being its leaking like a biatch. One thing I dont know much about is the cardon joint. What should I look for to make sure it is still good? If there are broke parts, where can I buy them? I prefer to stay away from Autozone...I could try Napa. Not sure if their quality for parts is really that much better though. Thanks.
Trending Topics
Junior Member
Joined: Oct 2009
Posts: 89
Likes: 0
From: Hudson, WI
Year: 1996
Model: Cherokee
Engine: 4.0 liter K&N intake, Hushpower 40 series exhaust
I took my front drive shaft to a shop to have it shortened and they found that the seal on the ball and the pin inside the joint were all bad. They said most joints that style go bad pretty fast. It was something about having an internal or external seal when it should be the opposite. Anyway the pin was damaged similar to the pic. It had to be lathed off and they welded and balanced the new one. Hope that helps good luck.
Thread Starter
Junior Member
Joined: Feb 2010
Posts: 77
Likes: 0
From: Chicago
Year: 1994
Model: Cherokee
Engine: 4.0L
rm_standard@yahoo.com
Thanks man!
Also thanks for the pic Sam, hopefully mine doesnt need a new pin part. I can handle replacing the seal...bleh.
Thanks man!
Also thanks for the pic Sam, hopefully mine doesnt need a new pin part. I can handle replacing the seal...bleh.
Senior Member
Joined: Oct 2009
Posts: 537
Likes: 2
From: NW Florida
Year: 1999
Model: Grand Cherokee
Engine: 4.0
the stock straps are crap, plain and simple. do this instead: https://www.cherokeeforum.com/f51/re...version-28141/


You're so welcome. I ripped the straps off the rear yoke once, and had to leave the Jeep on trail cause my 4wd wasn't working and the u-joint was toast. Then about a month later the new straps started to stretch so I went to the u-bolts and they haven't budged since. Plus they're a ton easier to get on and off than the stupid straps.
Thread
Thread Starter
Forum
Replies
Last Post
Kydude7
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
7
Sep 20, 2015 06:35 AM
codykrr
Modified XJ Cherokee Tech
9
Sep 18, 2015 01:27 PM
mach3lude
Modified XJ Cherokee Tech
17
Sep 10, 2015 02:34 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



