So Today I was replacing my s belt, water pump, and fan clutch. When I got to the fan clutch I was taking out the four bolts on the pulley and now I'm stuck. they're not bolts. 3 studs are still in there, how do I get them out or can I replace the fan clutch with them still in there? It's a 1995 cherokee sport. Has Anyone had this problem? Thanks!

 

The studs should stay in, only the nuts need to be removed. Screw the studs back in, install the fan/clutch assembly then run the nuts onto the studs. A 3rd hand helps.

 

i'd just leave it alone. the clutch assy and pulley both slide off the studs.

just pull it off and reinstall everything like you took it apart.

 

Ah I see. Ok thanks!