Faded and worn Jeep decals
Thread Starter
Junior Member
Joined: Feb 2013
Posts: 225
Likes: 0
From: Holland, Michigan
Year: 2000
Model: Cherokee
Engine: 4.0L
I have had a lot of jeeps with faded or chipped and worn off decals. The 4x4, sport, cherokee, Jeep etc. it looks like crap and rather than replacing them (I know it's not that hard), I wonder if someone has found a trick that works. I thought of a silver sharpie, maybe a chrome touch up paint etc? Any ideas would be great. Sounds stupid I know, but worth a try.
Well my honest opinion on this is, remove them. If the badges and decals are faded and chipped than I personally would debadge it. It looks sleek. I removed the pin striping and 4x4 decal from mine with a heat gun and they came off clean. If you really want to fix them, they sell pinstripe tape and 4x4 decals at the chain parts stores, advance, autozone, pep boys, etc... That's my 2 cents At least.
Member
Joined: Nov 2013
Posts: 190
Likes: 0
From: Faiview,Pa.
Year: 1987
Model: Cherokee
Engine: 4.0 with 96 cam and 19lb.four hole injectors
I have gone to vinyl graphics makers to have "Jeep" stickers cut with a plotter. They do a great job and it's not nearly as expensive as going to a dealer. They can cut them out of a wide variety of colors too. A lot of times you can find them on craigslist.
Thread
Thread Starter
Forum
Replies
Last Post
Rotorhead
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
20
Sep 23, 2023 04:17 PM
StPTrucker
Introductions
30
Nov 22, 2015 05:07 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



