factory front skid plate
#1
Senior Member
Thread Starter
factory front skid plate
so i pick a skid plate up at the loacl jy for the front of my xj. i didnt pay attention to where on the front of the unibody how it was bolted in. can anyone post a pic showing me and let me know what size bolts need to be used? also i think on the pass side it thred into the body what size tap is needed to clean the threds. thanks
#2
☠ CF Sheriff ☠
front of the skid is secured to the radiator crossmember from the factory with double ended studs - m8x1.25x44 with a nutsert - i'd just use a nut and bolt though the holes in the crossmember
rear is secured with M10x1.5x30
rear is secured with M10x1.5x30
Thread
Thread Starter
Forum
Replies
Last Post
MidwestNick
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
02-28-2016 02:05 AM
RickJames Bish
Modified XJ Cherokee Tech
5
09-02-2015 03:22 PM
WTT[NorAtl]: Looking for a cabover truck, 1980s through 1990s
Cherokee_Laredo
Wanted
0
09-02-2015 01:00 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)