I have a RC 6.5" Long Arm lift and don't really like the look of the rake it has and also want a little more ground clearance for a decent size set of 35"s but don't really know my options. What would be the best option I have to lift it a little more without compromising too much ride comfort? I'll post a pic tomorrow. I feel like my front end is even lower than most.

 

coil spacers and shackles would be your best bet....but if you lookin for ride quality you might as well just get new coils and leafs

 

I already have the 5inch drop down shackles in the rear from RC. If nothing else, I really jyst need the front end to sit a little higher to even out the overall hieght. Is there something that could be adjusted in the front end, like the lower/upper control arms to make the ride height a little taller up front?

 

rustys sells all the way up to 9 1/2 inch coils

 

I have a 6.5 rc lift too but the short arm. I was looking at it today and notice the front seems lower than the rear. Its like the front settled but the rear is still the same. Thinking of adding a front 1" spacer to balance it out. Maybe u should try that.

Also, if u just do some trimming and bumpstops u can run 35's. Im looking for a set now too.

 

With mine, the front end immediately was lower as soon as I finished the lift. But I was thinkin maybe 2inch spacers. You think that would affect the shocks or anything else negatively since it would want to stretch them out?

 

No, you should be fine. It may seem like less drop but longer shocks will fix that.

 

I would call rough country and make sure they sent you the right front set up.