Pit1981

Got under the green lantern today to find my knocking sound and low and behold the exhaust pipe after the cat has completely rusted apart from the muffler and a mount has broken. Ok. I need a new exhaust. What can I do for a good sound but not too expensive. Also. Os there any way to go dual on this job or am I destin for a single pipe??

TheJerm

you can do duals if you want. The easiest and cheapest way is just put a fake tail pipe on the other side of the real pipe. Anything more is a waste of money but might look cool

OverlandZJ

check out the Dynomax catback from summit, they had a nice rebate that may still be going on.

razor02097

I spent about $40 for my catback....

https://www.cherokeeforum.com/f46/pr...84/#post574937

Pit1981

Where did you get it

razor02097

I built it using the OEM tail pipe and cherrybomb 2 1/4" in/out glass pack. PN and details for muffler is below. It was a direct fit. I welded it all together but you could use a clamp to save you time.

Dsandine

I got the 4wd stainless cat-back for pretty cheap, comes with a turbo muffler. A lot of people have told me they like how it sounds, but I am not a fan of turbo mufflers, also alot of people like the flowmaster sound (once again I hate that sound) but for the price of the 4wd stainless kit you can just buy any muffler you like of same dimensions and it still cheap even with added cost of another muffler if you went that route.

Or you can just go to an exhaust shop and they can probably fix what you got and put another muffler on if you want, and that doesn't usually cost much at all, but if your whole exhaust is broken I would just get a cat-back kit.