Engine Problems!! Need Help
Thread Starter
Member
Joined: Jul 2009
Posts: 138
Likes: 0
From: Tipp City, Ohio
Year: 1987
Model: Cherokee
Engine: 6 Cylindar 4.0L
While im driving I noticed today that while driving when I started it up it feels like my engine is running on a 5cyl. or something because its running very rough. When I hit the gas it rumbles very loud. yes i know I ripped out all the carpet but it never made that same rumbling sound before though, while im ideling at the red light my RPM's are running on 200 or 300 RPM's... my oil is low but my odomener is like 2000 miles.... my gas is alittle under a half tank. Some one help please.
CF Veteran
Joined: Jul 2009
Posts: 2,158
Likes: 11
From: Chico,ca
Year: 89
Model: Cherokee
Engine: 4.0
The first thing I would do is a compression check,make sure it is not mechanical. if you are sure it is a miss then pull injector connections until you find the cylinder it is,and chec k the plug and wire
CF Veteran
Joined: Jul 2009
Posts: 2,158
Likes: 11
From: Chico,ca
Year: 89
Model: Cherokee
Engine: 4.0
Then check fuel pressure,plugs,wires,injectors,dist cap and rotor,I have found as long as it is good mechanicaly,it is easy to fix. Do you recall what the pressures were on compression?
Thread Starter
Member
Joined: Jul 2009
Posts: 138
Likes: 0
From: Tipp City, Ohio
Year: 1987
Model: Cherokee
Engine: 6 Cylindar 4.0L
i replaced it about a month ago and im still around 2000 miles. im gonna be replacing it soon. whats the iac? but also my dad also said my o-rings could be going bad
Thread
Thread Starter
Forum
Replies
Last Post
David Chauncey Clothier
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
Aug 29, 2015 09:31 PM
clark40
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
Aug 28, 2015 07:11 AM
Kevin Icenhour
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
Aug 21, 2015 08:22 PM
CCKen
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
Aug 20, 2015 08:07 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



