Engine mounts

Reply Subscribe

Thread Tools

Search this Thread

Aug 15, 2017 | 09:37 AM

andresr23

Thread Starter

Newbie

Joined: Oct 2014

Posts: 16

Likes: 0

From: BROWNSVILLE, TEXAS

Year: 1999

Model: Cherokee

Engine: 4.0

Engine mounts

I am trying to install my engine mounts, but the engine moved back and the bracket that is bolted to the motor is slanted and the base where the mount sits, is straight. I am having a hard time . Any suggestions

Aug 15, 2017 | 10:10 AM

OldTires

Senior Member

Joined: Mar 2014

Posts: 952

Likes: 55

From: Eastern Long Island, NY

Year: 1996

Model: Cherokee

Engine: I6 Cyl / 4L

Are you using a block of wood and a floor jack to support and maneuver the engine around? The oil pan cover has a big X mark that marks were to put the wood and jack. You have to do this gently and slowly, with very small, incremental adjustments until the parts align. Also, your Jeep should not be jacked up or on an incline - it should be flat on the ground, wheels chucks so it doesn't move much while you wrestle with the engine.

Aug 15, 2017 | 10:23 AM

fb97xj1

CF Veteran

Joined: Dec 2015

Posts: 3,038

Likes: 338

From: PA

Year: 1997

Model: Cherokee

Engine: 4.0L

How far back has it shifted? You are doing one at a time, yes? The transmission mount can wear out letting the engine move some, too.

Aug 15, 2017 | 11:55 AM

extrashaky

Banned

Joined: Feb 2014

Posts: 2,379

Likes: 18

From: Florida

Year: 2000

Model: Cherokee(XJ)

Engine: Golen 4.6L

Quote:

Originally Posted by andresr23

I am trying to install my engine mounts, but the engine moved back and the bracket that is bolted to the motor is slanted and the base where the mount sits, is straight.

Is the bracket still fully attached to the engine, or have the bolts broken?