driveshaft/sye problem
CF Veteran
Joined: Nov 2008
Posts: 2,473
Likes: 9
From: Paso Robles Ca
Year: 1991
Model: Cherokee
Engine: 4.0
or hit some junk yards a cherokee with a different trans or motor my have the length you need
CF Veteran
Joined: Oct 2009
Posts: 1,474
Likes: 2
From: south jersey
Year: 1997
Model: Cherokee
Engine: 4.0
how about you try a 1" transfer case drop , all you need is 1" steel square tubing , drill some holes and longer bolts , i have 6.5" lift and really cant understand why your having an issue like that
Thread Starter
Member
Joined: Dec 2009
Posts: 111
Likes: 0
From: Roseville MN
Year: 1991
Model: Cherokee
Engine: inline 6 HO
oo ic, i have a 4inch lift with 1 inch tc drop, so if i go to 2 inch tc drop would that solve the problem? but then again i still want my ground clearance
MJ>XJ
Joined: Mar 2009
Posts: 17,836
Likes: 7
From: Griffin, G.A.
Year: 1990
Model: Comanche
Engine: 4.0 I6
it will help... you shouldnt be pulling your driveshaft out that easily i dont think... do the 2in transfer case drop for now so you can keep it on the road... and start saving for the Hack-N-Tap on ebay for $200... you can install it yourself pretty easy and itll fix your problems more so... then you can go back to a 1in drop or no drop transfer case...
MJ>XJ
Joined: Mar 2009
Posts: 17,836
Likes: 7
From: Griffin, G.A.
Year: 1990
Model: Comanche
Engine: 4.0 I6
or maybe just take the blocks out for now till u can save some more money... or install wedges that aim your rear axle up towards the tranny... this giving better angle and alittle more length...
MJ>XJ
Joined: Mar 2009
Posts: 17,836
Likes: 7
From: Griffin, G.A.
Year: 1990
Model: Comanche
Engine: 4.0 I6
also take a measurment of your driveshaft while its out... and go to a JY and look for a longer one from a ZJ or a different XJ... they had different lengths depending on what axles and stuff... u might can get one longer for $20 and be done with it...
