Driveshaft Question
Thread Starter
Seasoned Member
Joined: Aug 2010
Posts: 358
Likes: 3
From: Illinois
Year: 1999
Model: Cherokee
Engine: 4.0
Driveshaft Question
I have a '99 XJ sport with some rusty driveshafts. I have a D30 in front and a 8.25 in the rear. It's a 4.0 with automatic trans and a NP231 TC.
I'm looking for used clean driveshafts to replace mine. It seems that fronts are all the same, I think. How about rears? Will a driveshaft from a 2000 fit? Does D35 or 8.25 make a difference?
I'm looking for used clean driveshafts to replace mine. It seems that fronts are all the same, I think. How about rears? Will a driveshaft from a 2000 fit? Does D35 or 8.25 make a difference?
CF Veteran
Joined: Aug 2010
Posts: 1,168
Likes: 4
From: Williamsport, Pa
Year: 1997
Model: Cherokee
Engine: 4.0L
rust is normal and can be cleaned off if you feel the need.
If you still want to purchase new driveshafts you should get them from the same type of drivetrain- 4.0L/AW4/NP231/D30/Chry8.25. the D35 is a smaller axle and will have a longer driveshaft so it won't work, but the front one still should.
If you still want to purchase new driveshafts you should get them from the same type of drivetrain- 4.0L/AW4/NP231/D30/Chry8.25. the D35 is a smaller axle and will have a longer driveshaft so it won't work, but the front one still should.
Thread
Thread Starter
Forum
Replies
Last Post
Jooman07
Modified XJ Cherokee Tech
29
Jun 22, 2016 10:00 PM
byrns149
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
Sep 11, 2015 10:25 AM
mach3lude
Modified XJ Cherokee Tech
17
Sep 10, 2015 02:34 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)