drilling the track bar mount with a 3" lift..
#1
Member
Thread Starter
Join Date: Feb 2010
Location: Schererville, IN
Posts: 219
Likes: 0
Received 1 Like
on
1 Post
Year: 1997
Model: Cherokee
Engine: 4.0
drilling the track bar mount with a 3" lift..
I was wondering if I should bother drilling the TB mount with only 3" of lift.. My driver side tire protrudes noticeably further past the fender than the passenger size does, I'd say about an inch..
Now I know the writeups for a 4.5" lift say to drill it over 3/4", but there is no mention with the 3" kits.. and I assume you would want to go less than 3/4" but you couldn't go too much less otherwise you would just be making an elongated hole rather than a seperate hole because it is a 7/16" hole that you are drilling..
Make sense? haha, well I rambled that but anyone who has ever drilled their TB will know what I am talking about..
Do most people drill their track bar bracket over with only 3" of lift? or do you just live with the offset track?
Now I know the writeups for a 4.5" lift say to drill it over 3/4", but there is no mention with the 3" kits.. and I assume you would want to go less than 3/4" but you couldn't go too much less otherwise you would just be making an elongated hole rather than a seperate hole because it is a 7/16" hole that you are drilling..
Make sense? haha, well I rambled that but anyone who has ever drilled their TB will know what I am talking about..
Do most people drill their track bar bracket over with only 3" of lift? or do you just live with the offset track?
#2
Newbie
Join Date: Mar 2010
Location: Peterborough, On
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
have a look there http://www.go.jeep-xj.info/HowtoTrackbar.htm they explain how to do it and it wont make a difference how high your lift is...
Thread
Thread Starter
Forum
Replies
Last Post
southfloridajeeps
Modified XJ Cherokee Tech
32
03-04-2023 01:10 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)