did a search nothing came up..
Thread Starter
Junior Member
Joined: Mar 2010
Posts: 63
Likes: 0
From: Westville N.J.
Year: 1997
Model: Cherokee
Engine: 4.0
looking to find out how hard it is to install a cb radio..ive installed head units with no problem, wanted to also know if i would need anything eles along with the cb for installing or ect...
thanks for the help
thanks for the help
Honorary Moderator
Joined: Mar 2010
Posts: 8,135
Likes: 16
From: Gilbert AZ/Las Cruces NM
Year: 1996
Model: Cherokee
Engine: 4.0 upgraded
it is super easy.
wire up pos/neg.
run your coax cable to your antenna. Make sure your antenna has a good ground plate. Get a SWR meter and tune. Your good to go
wire up pos/neg.
run your coax cable to your antenna. Make sure your antenna has a good ground plate. Get a SWR meter and tune. Your good to go
Thread Starter
Junior Member
Joined: Mar 2010
Posts: 63
Likes: 0
From: Westville N.J.
Year: 1997
Model: Cherokee
Engine: 4.0
Honorary Moderator
Joined: Mar 2010
Posts: 8,135
Likes: 16
From: Gilbert AZ/Las Cruces NM
Year: 1996
Model: Cherokee
Engine: 4.0 upgraded
and an SWR meter is to tune it...
you connect it via a patch cable (2ft coax cable) and you turn to channel 1 and "key on" and take a reading. then turn to channel 40 and "key on" and take a reading. They both should be matching readings. If not you need to legnthen or shorten the antenna. The best tunning is 1:1 but anything under 2.5:2.5 is acceptable anthing more than 2.5:2.5 will hurt your radio. Its really simple. YOu just need to do it a large open area
you connect it via a patch cable (2ft coax cable) and you turn to channel 1 and "key on" and take a reading. then turn to channel 40 and "key on" and take a reading. They both should be matching readings. If not you need to legnthen or shorten the antenna. The best tunning is 1:1 but anything under 2.5:2.5 is acceptable anthing more than 2.5:2.5 will hurt your radio. Its really simple. YOu just need to do it a large open area
Thread Starter
Junior Member
Joined: Mar 2010
Posts: 63
Likes: 0
From: Westville N.J.
Year: 1997
Model: Cherokee
Engine: 4.0
and an SWR meter is to tune it...
you connect it via a patch cable (2ft coax cable) and you turn to channel 1 and "key on" and take a reading. then turn to channel 40 and "key on" and take a reading. They both should be matching readings. If not you need to legnthen or shorten the antenna. The best tunning is 1:1 but anything under 2.5:2.5 is acceptable anthing more than 2.5:2.5 will hurt your radio. Its really simple. YOu just need to do it a large open area
you connect it via a patch cable (2ft coax cable) and you turn to channel 1 and "key on" and take a reading. then turn to channel 40 and "key on" and take a reading. They both should be matching readings. If not you need to legnthen or shorten the antenna. The best tunning is 1:1 but anything under 2.5:2.5 is acceptable anthing more than 2.5:2.5 will hurt your radio. Its really simple. YOu just need to do it a large open area
awesome thanks for the heads up !
Thread
Thread Starter
Forum
Replies
Last Post
sluger17
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
Jul 8, 2023 07:08 AM
ra.stewart
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
Feb 15, 2021 01:47 PM
DieselDaze
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
Sep 30, 2015 06:42 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




