so on my way back from a tom petty concert my girl was driving and had some really bad wobble next day i get underneath and driverside lca seems loose bad bushings going to replace all upper and lower

then noticed my track bar end link on passenger side almost hit the spring i dont think anything is bent when you lift it does it change the angle of the end link to cuase this or whats the issue im sure that doesnt help any with my dw seems if i were to buy new ones it would still be in the same position

anything else i should replace im goin on a trip to wisconsin in a couple days any help would be nice

 

Trac Bar needs to be relocated or upgraded to adjustable.

 

is it pretty easy to relocate

 

Depends on lift and wallet. For relocation some redrill the hole ,some buy relocation bracket and some buy adjustable bar. Buying the bar is the best way but most costly .A bracket is less costly but only works to certain lift size and reuses old trac bar which could have issues causing shakes. Third is cheapest way but drill hole wrong then got a hole new problem. Also still uses old bar. This only relocates front axle to near center .Not guaranteed to stop shacke .All steering parts should be checked for tightness .

 

Don't redrill it. It's no good. Spend the coin on a quality double sheer track bar.

 

well ive checked evrything under there it all looks tight no play exept the end link issue and some play in lower control arms i will buy a adjustable one then new bushings are on order be here friday thanks