Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

Dash Panel

Thread Tools
 
Search this Thread
 
Old Feb 10, 2011 | 10:29 AM
  #1  
NorthGaXJ's Avatar
Thread Starter
Junior Member
 
Joined: Jan 2011
Posts: 30
Likes: 0
From: Forsyth Co. Ga
Year: 96
Model: Cherokee
Engine: 4.0 HO
Default Dash Panel

what is the trick to taking this off without braking it?? I am trying to replace a radio and it is a big pain to deal with-
Reply
Old Feb 10, 2011 | 10:34 AM
  #2  
krawlthis's Avatar
Senior Member
 
Joined: May 2010
Posts: 745
Likes: 1
From: Here, There, Everywhere
Year: 1997
Model: Grand Cherokee
Engine: 5.2
Default

Originally Posted by NorthGaXJ
what is the trick to taking this off without braking it?? I am trying to replace a radio and it is a big pain to deal with-
U have to unscrew all the screws. There are quite a bit of them. Under the dash, behind the ashtray, there is about 10 of them
Reply
Old Feb 10, 2011 | 10:41 AM
  #3  
evilxj85's Avatar
Seasoned Member
 
Joined: Feb 2009
Posts: 440
Likes: 0
From: Oregon city, OR
Year: 94
Model: Cherokee
Engine: 4.0
Default

there are 4 screws
Reply
Old Feb 10, 2011 | 10:45 AM
  #4  
goldenlandscaping's Avatar
Senior Member
 
Joined: Mar 2010
Posts: 693
Likes: 0
From: Carrollton, Georgia
Year: 1995
Model: Cherokee
Engine: 4.0 Liter High Output
Default

two above speedo, one under info light panel, and one under the the stock clock location then carefully pull it out take your time and be patient because it has several clips holding it in
Reply
Old Feb 10, 2011 | 10:53 AM
  #5  
phillyxj570's Avatar
CF Veteran
 
Joined: Mar 2010
Posts: 1,200
Likes: 0
From: wilkes barre PA.
Year: 96
Model: Cherokee
Engine: 6 cylinder
Default

I just did this like a week ago. There are two screws on the top part by speedo. One by the head light switch and one more on above the cig lighter. The rest is held in with clips. After you get it loose in order to completely your going to have to remove the plastic behind the steering wheel, there is one phillips head screw and 2 torx (unsure of size).

Last edited by phillyxj570; Feb 10, 2011 at 11:19 AM.
Reply
Old Feb 10, 2011 | 12:11 PM
  #6  
NorthGaXJ's Avatar
Thread Starter
Junior Member
 
Joined: Jan 2011
Posts: 30
Likes: 0
From: Forsyth Co. Ga
Year: 96
Model: Cherokee
Engine: 4.0 HO
Default

thanks- I have all screws and it is loose just didn't know how to get it out without breaking- I wll look for screws fpr plastic around steering wheel.
Reply
Old Feb 10, 2011 | 12:39 PM
  #7  
krawlthis's Avatar
Senior Member
 
Joined: May 2010
Posts: 745
Likes: 1
From: Here, There, Everywhere
Year: 1997
Model: Grand Cherokee
Engine: 5.2
Default

Originally Posted by evilxj85
there are 4 screws
I was talking about the whole dash... But I do over exaggerate alot
Reply
Old Feb 10, 2011 | 12:48 PM
  #8  
XJ5150's Avatar
Member
 
Joined: Jan 2011
Posts: 206
Likes: 1
From: Concord, NC
Year: 1995
Model: Grand Cherokee
Engine: 4.0L AWD
Default

I removed the little trim piece under the steering column that is part of that dash bezel trim. Once the screws were out I tilted the wheel down, grabbed the bezel at the gauge cluster at the top and over to the right as well with my right hand... a quick firm jerk and it popped out... then you want to finagle it a bit... be careful. Just grab the thickest parts, not the outside left and right edges.
Reply
Old Feb 10, 2011 | 12:49 PM
  #9  
KD3NE's Avatar
Senior Member
 
Joined: Feb 2011
Posts: 719
Likes: 0
From: Bel Air, Maryland 21015
Year: 1995
Model: Cherokee
Engine: 4.0
Default

Originally Posted by NorthGaXJ
thanks- I have all screws and it is loose just didn't know how to get it out without breaking- I wll look for screws fpr plastic around steering wheel.

It's trick, like you have to pull it up and back and then spin it to one side and flex it a bit to work it out.

Odd that I have done this several times this month and that is the best way I can described it.

If you have TILT STEERING - tilt it all the way down.
Reply
Old Feb 10, 2011 | 12:49 PM
  #10  
XJ5150's Avatar
Member
 
Joined: Jan 2011
Posts: 206
Likes: 1
From: Concord, NC
Year: 1995
Model: Grand Cherokee
Engine: 4.0L AWD
Default

I also had to shave the radio opening just a bit to slide the cage for the new radio in... mine is held in place by the trim bezel and not the stuff that bolts to the radio inside the dash opening.
Reply
Old Feb 10, 2011 | 01:03 PM
  #11  
NorthGaXJ's Avatar
Thread Starter
Junior Member
 
Joined: Jan 2011
Posts: 30
Likes: 0
From: Forsyth Co. Ga
Year: 96
Model: Cherokee
Engine: 4.0 HO
Default

no tilt steering for me that is why it is so hard..I have an Jensen that has went out, going to put a factory AM/FM only in..came out of a 95 Sport. I like it b/c it has Jeep on it and it was dirt cheap
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ZJBeachRunnerGC
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
18
Mar 10, 2021 05:52 PM
Cane
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
23
Dec 11, 2015 11:09 AM
riparianbarbarian
Introductions
3
Oct 23, 2015 03:57 PM
Cherokee_of_Tennessee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
Sep 30, 2015 12:10 PM
xjcarolina
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
Sep 29, 2015 08:43 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 08:53 PM.