ok i have a 93 cherokee 2.5l 4cyc, 4wd and i was attempting to replace my rear ujoint and all of the replacements have been .002 thousandths of and inch short . has anyone else ever have this problem ? and any solutions would be helpful?

 

.002 thousandths of and inch short?

 

yea short , its a spicer drive shaft and spicer ujoints but all of the aftermarket parts are that much shorter than what i have ...

 

you do realize that .002 thousandths is actually

0.002 x 0.001 = 0.000002"

are you sure you did not mean just 0.002"

cause if it is 0.000002" then you have a really good set of calipers

 

it was at a napa, but i wish that i had that set!! =)
but yea a couple of hairs off in other words.