dana 44 from a jeep j truck?
12-18-2010, 06:09 PM
#1
Junior Member
Thread Starter
Join Date: Jul 2010
Location: new Jersey
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: I6
dana 44 from a jeep j truck?
will this axle work for my 88 cherokee in place of the dana 30? im sure different mounts are need but other then that will it work?
12-18-2010, 06:46 PM
#2
CF Veteran
Join Date: Apr 2008
Location: Northern Illinois
Posts: 2,237
Likes: 0
Received 3 Likes
on
3 Posts
Year: 90
Model: Cherokee
Engine: 4.0
Mounts are different...
Leaf springs rather than coils....
Different gear ratios...
Could be a 5 bolt x 5inch, 6 bolt or 8 bolt lug axle depending on year and truck...
IIRC, some years were passenger side drop axles.
Leaf springs rather than coils....
Different gear ratios...
Could be a 5 bolt x 5inch, 6 bolt or 8 bolt lug axle depending on year and truck...
IIRC, some years were passenger side drop axles.
12-18-2010, 06:57 PM
#4
Junior Member
Thread Starter
Join Date: Jul 2010
Location: new Jersey
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: I6
ya full width is what i want i found a good deal on it but i want to know if itll be the same work as like a front dana 60 or ford hp 44
12-18-2010, 07:06 PM
#5
CF Veteran
Join Date: Jan 2010
Location: WI
Posts: 1,506
Likes: 0
Received 2 Likes
on
2 Posts
Year: '99
Model: Cherokee
Engine: 4.o
It will work but you will need a gear matching full with rear to match. And i think your best bet is to make a truss for both front and rears and build your mount on that. Just how I would do it. Oh make sure what side drop that front is the J series trucks had left and right side drops depending on what year and I don't know witch one is witch.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)