dana 35 ?
#2
Senior Member
Thread Starter
Join Date: Jun 2012
Location: archbald pa
Posts: 730
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0 ho
Should i just up grade to the 8.25 or the 44 my tire size will never be bigger than a 32 looking for opinions on whats best thanks
#3
Junior Member
Do not rebuild it.
Find an 8.25 in a Junk yard and never look back.
As long as you find one with the same gear ratio it will be a direct bolt in.
Find an 8.25 in a Junk yard and never look back.
As long as you find one with the same gear ratio it will be a direct bolt in.
#5
Senior Member
Thread Starter
Join Date: Jun 2012
Location: archbald pa
Posts: 730
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0 ho
Originally Posted by lowrange2
Do not rebuild it.
Find an 8.25 in a Junk yard and never look back.
As long as you find one with the same gear ratio it will be a direct bolt in.
Find an 8.25 in a Junk yard and never look back.
As long as you find one with the same gear ratio it will be a direct bolt in.
#6
CF Veteran
Join Date: Mar 2011
Location: California
Posts: 2,570
Likes: 0
Received 4 Likes
on
4 Posts
Year: 1992
Model: Cherokee
Engine: 4.0 HO
Yes. Check craigslist for vehicles being parted out, call around to your local JY's. You should be able to find a 29 spline for under $200. The factory limited slip option on some 8.25's really isn't bad either.
#7
Senior Member
Thread Starter
Join Date: Jun 2012
Location: archbald pa
Posts: 730
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0 ho
Originally Posted by sthon
Yes. Check craigslist for vehicles being parted out, call around to your local JY's. You should be able to find a 29 spline for under $200. The factory limited slip option on some 8.25's really isn't bad either.
Trending Topics
#10
Senior Member
Thread Starter
Join Date: Jun 2012
Location: archbald pa
Posts: 730
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0 ho
Originally Posted by ryan8551226
I believe u can use same leafs but will need dif u bolts
#12
Senior Member
Thread Starter
Join Date: Jun 2012
Location: archbald pa
Posts: 730
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0 ho
Originally Posted by sthon
Perches are the same. Only thing you'll need is new u-bolts with 3" diameter.
#15
Senior Member
Thread Starter
Join Date: Jun 2012
Location: archbald pa
Posts: 730
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0 ho
Lol death of a 35 si i destroyed my dana 35 after ordering the rebuild so im gonna sell that anyway im gonna do the 8.25 29 spline swap.i have a few questions i have the factory tow package wit 3.73 gears are there any 8.25s with those gears also i wanna reuse my 35 drive shaft i have 4.5 lift so with the longer pinion on the 8.25 i should be close to the factory location in regards to the slip yoke and the tail shft Location because of the lift doesthis make senses to anyone