dana 30 ?s
CF Veteran
Joined: Nov 2008
Posts: 7,874
Likes: 100
From: Northern Ontario, Canada
Year: 1990, 1999, 2000
Model: Cherokee
Engine: 4.0
visual inspection.
squat down on the passenger side and look at the front and rear of the axle tube about half way from the wheel to the pumpkin.
if it's a vac disconnect axle (CAD), you will see a cast section where the upper control arm mounts that houses a vacuum motor.
if it's not a CAD axle, you will only see a stamped steel upper control arm mount that is hollow. no cast section, no vac motor.
cheers.
squat down on the passenger side and look at the front and rear of the axle tube about half way from the wheel to the pumpkin.
if it's a vac disconnect axle (CAD), you will see a cast section where the upper control arm mounts that houses a vacuum motor.
if it's not a CAD axle, you will only see a stamped steel upper control arm mount that is hollow. no cast section, no vac motor.
cheers.
Thread
Thread Starter
Forum
Replies
Last Post
extrashaky
Other Vehicles. Other Jeep models & cars and trucks of other makes
17
Jun 17, 2023 03:57 PM
Lightning_19k
Modified XJ Cherokee Tech
14
Oct 3, 2015 09:52 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)