D44 swap help.
#1
Junior Member
Thread Starter
Join Date: Jan 2012
Location: roswell new mexico
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0L
D44 swap help.
I picked up a set of full width axles from a Dodge ram for super cheap. And will be ordering ballistic coil bucket combo brakets. But after doing some measurements and the factory lower control arm brackets are 3ft from inside of the brackets. And my factory lower control arm brakets are 30" from inside of brackets. And if I'm correct my new coil buckets would have to sit an the very side of the differential on the d44 for the drivers side. Has anybody ever ran a d44 from from a 99 model ram pickup before and solved this problem?
Thread
Thread Starter
Forum
Replies
Last Post
FS[SouthCent]: 4.56 gear set and master install kits D30 and D44
dcollins3208
Axles/Tires/Wheels
12
12-11-2015 11:49 AM
xjnoah
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-16-2015 02:29 PM
csspencer
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-15-2015 07:30 AM
Ibanezz
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
24
09-10-2015 07:15 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)