D30 carrier bearing cap toque spec help

Reply Subscribe

Thread Tools

Search this Thread

Jul 23, 2011 | 07:05 PM

EVILXJ

Thread Starter

CF Veteran

Joined: Mar 2011

Posts: 1,273

Likes: 1

From: South Bend, IN

Year: 1995

Model: Cherokee

Engine: 4.6 stroker

D30 carrier bearing cap toque spec help

Got my axle tore down doing the seals and was trying to confirm the torque specs I've found online

I found 57ftlbs

Is this correct? Thanks

Jul 23, 2011 | 07:35 PM

SNIDELYWHIPLASH

Member

Joined: Dec 2009

Posts: 207

Likes: 5

From: South Jersey

Year: 2001

Model: Cherokee (XJ)

Engine: 4.0L I6 Power Tech

Just checked alldata.diy, and for my '92 it's 57lbs.
Edit: I believe that this is incorrect

Now, I just checked a '95 FSM, and it says 45lbs. for the Dana 30
This post (copied from FSM) also says 45lbs:
http://www.jeepforum.com/forum/f11/p...2/#post4952684

Bottom line:
45 ft.lbs. for Dana 30
57 ft.lbs. for Dana 35
70 ft.lbs. for Chrysler 8.25

Last edited by SNIDELYWHIPLASH; Jul 24, 2011 at 01:46 AM.

Jul 23, 2011 | 07:36 PM

Moncheche

Seasoned Member

Joined: Jun 2011

Posts: 281

Likes: 2

From: Garden Prairie

Year: 2000, (1957 Willys)

Model: Cherokee

Engine: 4.0L

How did the rebuild go? Did you have to spread the case like the FSM?

Jul 23, 2011 | 08:33 PM

EVILXJ

Thread Starter

CF Veteran

Joined: Mar 2011

Posts: 1,273

Likes: 1

From: South Bend, IN

Year: 1995

Model: Cherokee

Engine: 4.6 stroker

I got it tore down tonight. Came apart super easy. Just gotta pop the seals out, clean the tubes out and put the new seals in and put it all back together