d30 with 4.10"s
04-20-2013, 04:40 PM
#1
Newbie
Thread Starter
Join Date: Jul 2010
Location: pittsburgh PA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0
d30 with 4.10"s
what other front axle could you pull a carrier and gears from to put 4.10's in a cherokee with a d30 in it? yj/tj?
04-20-2013, 04:47 PM
#2
Seasoned Member
Join Date: Jun 2012
Location: Vancouver BC
Posts: 380
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1998
Engine: 4.0
Personally i would rather get new ones if your upgrading cause when it getting it from a wrecker you take the chance of getting Something messed up. Band new carriers only go for about 150 bucks that the route i would go IMO.
04-20-2013, 05:27 PM
#3
CF Veteran
Join Date: May 2012
Posts: 1,064
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
If yours is an 84-99 XJ, the same year range XJ and MJ front axles are the same, and iirc the YJs had HP30's. 00-01 XJs and all TJs had low pinion D30's, so the gears are different from the high pinion.
And I'd just swap the whole axle. You can get a good D30 front for $100 or less, as long as its out of a 2.5, 5 speed XJ it will have the 4.10's. And that's easier than swapping carriers.
And I'd just swap the whole axle. You can get a good D30 front for $100 or less, as long as its out of a 2.5, 5 speed XJ it will have the 4.10's. And that's easier than swapping carriers.
Thread
Thread Starter
Forum
Replies
Last Post
FS[SouthCent]: 4.56 gear set and master install kits D30 and D44
dcollins3208
Axles/Tires/Wheels
12
12-11-2015 11:49 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)