Cruise issues
02-23-2014, 03:40 PM
#1
Newbie
Thread Starter
Join Date: Apr 2013
Location: Virginia
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4L
Cruise issues
I have a 1990 cherokee that I can not get the cruise control to work. I have repaired vacume leaks under the battery area and checked other numerous issues. If you push and hold the resume switch the engine speed will increase but will the cruise will not set. I am thinking the multifunction switch or the servo is bad...how can I trouble shoot to figure which is bad?
(my defrost was stuck on until i repaired the vacume links)
(my defrost was stuck on until i repaired the vacume links)
02-23-2014, 03:50 PM
#2
CF Veteran
Join Date: Mar 2010
Location: Broward County Fl.
Posts: 47,923
Likes: 0
Received 22 Likes
on
22 Posts
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Apply vacuum to cruise unit see if it holds , also there A switch on brake pedal that has a vacuum line on it check that....the white one above brak light switch.
Last edited by freegdr; 02-23-2014 at 03:52 PM.
Thread
Thread Starter
Forum
Replies
Last Post
DWStiles
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
09-18-2015 06:10 AM
nrwphoto
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-09-2015 10:41 PM
Gauge
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
15
09-05-2015 11:02 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
