Is in this diagram the servo wiring? I don't see it

 

in the wireing diag i did not see it either what type cherokee is this xj what ?? sport ,laredo wagoneer

 

the wiring for cruise is in section e-12 thru 15 on the bottom

 

I've just read the diagram but i'm more confused then before....here it's signed that the servo have 6 wires not 5 !!!

 

me to lol

 

http://www.naxja.org/forum/showthread.php?t=970008

 

wish i could help more ,you did the basics checked fuse,checked for vacuum,applied vacuum to servo checked connection at brake pedal ,correct good luck

 

Finally i'm agane on this problem, i've checked everything and i'm at the sick conclusion that i don't have the speed sensor on the car, on my transfer case there is only a sensor that i found in a picture on the web and seems to be the shift position sensor.
And i only have the cable for the speed without any sensor, the strange and bad think it's that i can't find any disconnected wires near the transfer, can somebody check where go the speed sensor wires?

 

Speed sensor for cruse control in under the dash there should be a break in the speedo cable with a speed sensor in line

 

Finally work!!! Very good, maybe it was the speed sensor not good connected.

Now maybe it need some adjustment on the control unit, because the engine don't run smooth but it accelerates and drop the rpm continuously, everyway it keep really good the speed.

Can anybody explain me how to adjust the control unit?

Regards.

 

NICE link. Thank you, for sharing. : ) -EB