Coolant temp sensor problems
#1
Newbie
Thread Starter
Join Date: Jul 2009
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Coolant temp sensor problems
I just bought a 96' xj that had a bad engine. I finally found a good used 4.0 to replace it with. Durring instalation of the good engine i noticed that my old motor had a coolant temp sensor in the head on the driver rear side.... My good replacement engine however does not have a hole for the temp sensor. The engine runs fine but my temp gauge don't work. Any cheap tricks to fix this problem, Without adding aftermarket gauges or having machine work done to the head? Plz help! Thanks. Is there any way to tap into the sensor on the thermostat housing? Or are the resistance scales differt for the 2 sensors?
#2
Junior Member
Join Date: Apr 2009
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
i have this same problem in my 96 with motor swap also. we just didnt hook it back up. but im running an aftermarket gauge anyways. but my dummy light always kicks on and off alot.
Thread
Thread Starter
Forum
Replies
Last Post
Blackcherokee290
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
27
07-26-2022 07:52 PM
rdr8887
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
33
08-08-2017 07:28 AM
Ye Ol' Cherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
04-25-2017 08:35 AM
Chick-N-Picker
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
21
08-27-2015 12:27 PM
Ye Ol' Cherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
08-22-2015 01:43 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)