Control arm bushings
05-21-2009, 09:26 PM
#1
CF Veteran
Thread Starter
Join Date: Feb 2009
Location: Ohio
Posts: 1,184
Likes: 0
Received 4 Likes
on
2 Posts
Year: 1992
Model: Cherokee
Engine: 1995 ZJ 4.0
Control arm bushings
Any one know which control arm bushings will work with Rusty's Upper and lower ca's? I know that they use the stock style rubber kind so does that mean any bushings for the stock CA's will work in them too?
05-21-2009, 10:10 PM
#2
CF Veteran
Big Bad
I would start doing some measuring first. The stock ones are a larger diameter on one side, so they go in only one way. Is your CA set up that way?
I would start doing some measuring first. The stock ones are a larger diameter on one side, so they go in only one way. Is your CA set up that way?
05-21-2009, 10:15 PM
#3
CF Veteran
Thread Starter
Join Date: Feb 2009
Location: Ohio
Posts: 1,184
Likes: 0
Received 4 Likes
on
2 Posts
Year: 1992
Model: Cherokee
Engine: 1995 ZJ 4.0
Yes they have like a little ring on the inside of the control arms. So I figured that Icould use all the ones made for the stock CA's I just wanted to be sure.
Thread
Thread Starter
Forum
Replies
Last Post
lgrant
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
07-05-2022 12:19 AM
Busterboy
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
5
04-20-2018 05:38 PM
ROCKRIDGE 4WD
Vendor Showcase
0
09-15-2015 01:21 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)