Jeep Cherokee Forum - Control arm bushings

Jeep Cherokee Forum (https://www.cherokeeforum.com/)

- Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here (https://www.cherokeeforum.com/f2/)

- - Control arm bushings (https://www.cherokeeforum.com/f2/control-arm-bushings-16655/)

bigbadxj

05-21-2009 09:26 PM

Control arm bushings

Any one know which control arm bushings will work with Rusty's Upper and lower ca's? I know that they use the stock style rubber kind so does that mean any bushings for the stock CA's will work in them too?

4.3L XJ

05-21-2009 10:10 PM

Big Bad

I would start doing some measuring first. The stock ones are a larger diameter on one side, so they go in only one way. Is your CA set up that way?

bigbadxj

05-21-2009 10:15 PM

Quote:

Originally Posted by 4.3L XJ (Post 190004)

Big Bad

I would start doing some measuring first. The stock ones are a larger diameter on one side, so they go in only one way. Is your CA set up that way?

Yes they have like a little ring on the inside of the control arms. So I figured that Icould use all the ones made for the stock CA's I just wanted to be sure.

All times are GMT -5. The time now is 04:19 AM.