Control arm bushing
#1
Seasoned Member
Thread Starter
Join Date: Mar 2011
Location: Johnsonburg, Pa
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L I6
Control arm bushing
How hard are they to replace. Will removing my control mess with my alignment. And what tools will I need
#2
Seasoned Member
Join Date: Sep 2011
Location: Akron/Canton, OH
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.oh
They can be a bit of a *****, the bolts have a tendancy to rust and freeze to the inside of the bushing, if its a 96 or newer it will not mess with your alingment. Pretty sure they are a 13/16 or 3/4 nut/bolt.
#3
Junior Member
Join Date: Oct 2008
Location: Ontario, Canada
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
Year: 92
Model: Cherokee
Engine: 4.0
Lol....I had to do this once and found it a LOT easier to just buy the stock arms with the bushings in place. It can save you a headache trying to press out the old bushings. Definitely worth the extra $ to spare the troubles. You'll need some kind of press/vice set up to press out the old and press in the new. Some are sold with the exterior metal sleeve, and some without as well. Hope this helps.
Thread
Thread Starter
Forum
Replies
Last Post
lgrant
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
07-05-2022 12:19 AM
Busterboy
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
5
04-20-2018 05:38 PM
ROCKRIDGE 4WD
Vendor Showcase
0
09-15-2015 01:21 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)