Are the components of a D30 interchangable between the hp and lp versions
Thread Starter
Member
Joined: Nov 2011
Posts: 105
Likes: 0
From: Quakertown PA
Year: 2001
Model: Cherokee
Engine: 4.0
Are the components of a D30 interchangable between the hp and lp versions
I believe the pinion bearing on my lp D30 is on the way out. I'm gonna replace it with a hp. The hubs and u joints in the axles have less than 1000 miles on them. Will they swap over to the d30 hp I get? Does it matter that my lp was abs and has the rings on the axles. I'm disabling it due to an 8.25/disc swap. But will the parts fit?
CF Veteran
Joined: May 2008
Posts: 3,018
Likes: 23
Year: 1988
Model: Cherokee
Engine: AMC242
I believe the pinion bearing on my lp D30 is on the way out. I'm gonna replace it with a hp. The hubs and u joints in the axles have less than 1000 miles on them. Will they swap over to the d30 hp I get? Does it matter that my lp was abs and has the rings on the axles. I'm disabling it due to an 8.25/disc swap. But will the parts fit?
Everything else? Should be fine.
Thread
Thread Starter
Forum
Replies
Last Post
TNXJsleeper
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
Oct 2, 2015 08:04 PM
Snajo
Other Vehicles. Other Jeep models & cars and trucks of other makes
0
Sep 26, 2015 11:54 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
