Complete motor and trans rebuild question
#1
Junior Member
Thread Starter
Join Date: Jan 2010
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Complete motor and trans rebuild question
What all would i need to completely rebuild my motor and my aw4 trans?
I know this is a very noob question but i am a noob lol. And if theres a specifiv play i should look for parts let me know i have the 4.0
I know this is a very noob question but i am a noob lol. And if theres a specifiv play i should look for parts let me know i have the 4.0
#2
Member
Join Date: Jan 2011
Location: woodward
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0l
motor start with rings, bearings seals all the gaskets.possiblty of rods lifters and if u have a issue with the crank shaft. also wile your that deep do the plugs and wires that come with the normal tune up. do check and see if your head bolts have been streched. personally i replace them no matter what. now you may wana do the valve seals in the head and make sure no valves are not bad. check the valve springs also. also good opertunity to get you a fail open thermostat one more thing new push rod bolts. well there are a few more but you get the picture
Last edited by ivie_2006; 01-17-2011 at 09:25 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Sharkie
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
08-31-2015 08:21 AM
GregB58
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
08-28-2015 08:30 AM
EBowen95
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
49
08-25-2015 08:44 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)