Combination switch issue? low beams not working, high can toggle only
Thread Starter
Junior Member

Joined: Mar 2018
Posts: 96
Likes: 6
From: Houston, TX
Year: 1996
Model: Cherokee (XJ)
Engine: 4.0
low beams no longer working tonight. Fuses are good. High beams toggle just fine. High beams can not stay on but there is a click to engage - Is the combination switch broken or some other issue?
\
I am just wondering where I should start looking ... other than just blindly replacing the combination switch.
\
I am just wondering where I should start looking ... other than just blindly replacing the combination switch.
If you are going to blindly replace something, replace the headlight switch.
You have exactly the same symptoms as me, and I got mine from Rock Auto
It is hard to diagnose. It is also VERY hard to R&R, especially if the harness, which plugs in from above, is as short as mine was.
Never has the saying "oh for an extra inch" been so true
You have exactly the same symptoms as me, and I got mine from Rock Auto
It is hard to diagnose. It is also VERY hard to R&R, especially if the harness, which plugs in from above, is as short as mine was.
Never has the saying "oh for an extra inch" been so true
Thread
Thread Starter
Forum
Replies
Last Post
Jeepxj246
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
Feb 8, 2024 10:08 PM
Arkey
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
Apr 13, 2021 08:23 PM
Panicatak
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
0
Apr 12, 2019 07:49 PM
Lyferxb9s
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
Oct 15, 2013 07:17 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)






