Clutch Won't Disengage
Thread Starter
Seasoned Member
Joined: Nov 2011
Posts: 289
Likes: 0
From: West Warwick, RI
Model: Cherokee
Engine: 4.0L High Output
Clutch Won't Disengage
Hi!
Alright before anyone says to me, THE CLUTCH IS GONE...This is a completely brand new Centerforce Clutch that I just replaced. This problem, again, only shows its head in Reverse. Before anyone says, CHECK THE FLUID...That is also full. The clutch engagement point is totally normal in any other gear, until shifted into Reverse and it grabs on the floor. I have to shut off the Jeep, pump the clutch pedal, and then shift out of Reverse. If I don't, It just inches backwards. Also, yes I did bleed the system...12 DIFFERENT TIMES. Any help, again, is appreciated...
Alright before anyone says to me, THE CLUTCH IS GONE...This is a completely brand new Centerforce Clutch that I just replaced. This problem, again, only shows its head in Reverse. Before anyone says, CHECK THE FLUID...That is also full. The clutch engagement point is totally normal in any other gear, until shifted into Reverse and it grabs on the floor. I have to shut off the Jeep, pump the clutch pedal, and then shift out of Reverse. If I don't, It just inches backwards. Also, yes I did bleed the system...12 DIFFERENT TIMES. Any help, again, is appreciated...
CF Veteran
Joined: Mar 2010
Posts: 47,923
Likes: 38
From: Broward County Fl.
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
First of all gear selection has nothing to do with clutch function you no....
Last edited by freegdr; Jan 8, 2013 at 06:18 PM.
Trending Topics
CF Veteran
Joined: Mar 2010
Posts: 47,923
Likes: 38
From: Broward County Fl.
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
