So long story short, I was in gridlock traffic and I depress the clutch...pedal went down, but I shortly saw smoke coming under the hood from the driver side of the engine bay, closer to the firewall...the clutch pedal wouldnt come back up, and I was stuck in 2nd gear...so I pull over (lucky I had an open spot to, pop the hood and there is smoke coming from under the intake manifold... Im guessing I busted the hose somewhere but what I wish to know is
A. is my clutch totally f***ed?
B. if not, how do I change the hose?
C. What caused this??
Any help would be appreciated, since I use my Jeep as a daily driver to work and school
A. is my clutch totally f***ed?
B. if not, how do I change the hose?
C. What caused this??
Any help would be appreciated, since I use my Jeep as a daily driver to work and school
CF Veteran
hose has fttings on each end that unscrew like a brake line easy fix
Quote:
Soooo im on the autozone website looking at the hose and its asking wether its the Peugeot or the Aisin tranny...I think its the Aisin but how do I know for sure?Originally Posted by freegdr
hose has fttings on each end that unscrew like a brake line easy fix
CF Veteran
you have the Peugeot BA 10 5 speed (aka the puke alot) and i would check to see the part that was damaged before buying stuff. i have seen the slave blow before the the master line blew. so check so see which part is bad first.
Quote:
Not to say I don't trust ya but...Originally Posted by trans_am7935
you have the Peugeot BA 10 5 speed (aka the puke alot) and i would check to see the part that was damaged before buying stuff. i have seen the slave blow before the the master line blew. so check so see which part is bad first.
How can I tell? I called several auto suppliers out here (NAPA, AutoZone, Tognotti's, Pep Boys didnt even have it available at all) and they all ask if its the Aisin or Peugeot. Is there anywhere I can reference to what tranny I have?
Nothing more frustrating than ordering a part, waiting 3 days to find out its the wrong one....Been there!!!
CF Veteran
heres the peugot mount not the bracket off to the side and small nuts sticking out in the front and year
CF Veteran
CF Veteran
i would take the old line off after you nmake sure this is the problem and look up hydralic hose in the phone book have one made same day service 
Quote:
From the looks of it, looks like its the Puke-alot...which is awesome (not) because EVERY shop in town has to special order it.....Originally Posted by trans_am7935
you have the Peugeot BA 10 5 speed (aka the puke alot) and i would check to see the part that was damaged before buying stuff. i have seen the slave blow before the the master line blew. so check so see which part is bad first.
Thanks for the help bro, without it I would've been a lost dog..lol
Who's idea at Jeep/AMC was it to put a damn French tranny in an American built vehicle? Can I slap them???
CF Veteran
i have never had a problem with mine its all in the abuse it get put thru
Senior Member
Quote:
Who's idea at Jeep/AMC was it to put a damn French tranny in an American built vehicle? Can I slap them???
They probably thought it would go well with the French fuel management and ignition system. ( RENIX ) LOLOriginally Posted by onyx86
Who's idea at Jeep/AMC was it to put a damn French tranny in an American built vehicle? Can I slap them???
Quote:
I think the RENIX system is a good setup, but with that as well as the tranny, you would think later down the line parts would be more of a b**** to find....Originally Posted by KD3NE
They probably thought it would go well with the French fuel management and ignition system. ( RENIX ) LOL
BTW found the part I needed for CHEAP...and available tomorrow morning. BOOYAH!!!
http://www.napaonline.com/Search/Det...+59999+3999999