Clutch Housing question
#1
Newbie
Thread Starter
Join Date: May 2009
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1985
Model: Cherokee
Engine: 2.5L 4 cylinder
Clutch Housing question
Hey guys, I just bought a replacement clutch housing for my AX-4, but i notice that the flywheel is still exposed on the bottom. I know that it needs that block off plate. Is that plate just a lower section, can it be installed with out taking the tranny off? The block off plate isn't the same as the space plate is it?
#3
Renix Super Guru
Join Date: Mar 2008
Location: In yourz postez fissin jurr spelinzs
Posts: 24,653
Likes: 0
Received 16 Likes
on
12 Posts
Year: 1990XJ/1989MJ
Model: Comanche
Engine: 4.0L Renix
It is an inspection plate and is easily removable for "inspections" and should be checked on a yearly basis.
#4
Newbie
Thread Starter
Join Date: May 2009
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1985
Model: Cherokee
Engine: 2.5L 4 cylinder
Thanks guys for the help, I just need to find and get one. I'll probably put everything on and get the plate later on cause i'm not driving my xj until i get that plate and some other stuff done.
Thread
Thread Starter
Forum
Replies
Last Post
JayneCobb
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
26
08-11-2020 03:22 PM
NM-XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
10-23-2018 04:21 PM
Blackxj51
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
22
09-13-2015 06:06 PM
lil01cherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
09-10-2015 05:56 PM
shotseven
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-06-2015 03:06 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)