Clunk and roll when put in gear
#1
Newbie
Thread Starter
Join Date: Aug 2009
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0
Clunk and roll when put in gear
i have a 95 xj. 4.0 auto and it seems to have a clunk when i put it in gear and it rolls forwar or back depending on which gear. Ive heard it may be the drive shaft bearings. Any info would help
#2
CF Veteran
Join Date: Jul 2009
Location: Chico,ca
Posts: 2,158
Likes: 0
Received 10 Likes
on
9 Posts
Year: 89
Model: Cherokee
Engine: 4.0
You mean u-joints? there are bearings in the caps of the u-joints. If that is what your refering to,place it in park and block the tires so it will not roll and turn the drive shafts by hand and see if there is any slope in the u-joint. If there is no play then look at the diff,see if there is alot of movement there.
#3
Newbie
Thread Starter
Join Date: Aug 2009
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0
that is what i was refering to. And ill try the blocks tomorrow. Ill be lifting it soon and gettin a new shaft, sye and all so it woulb probably be a good time to swap anything else out if that were the problem. Thanx bro
Thread
Thread Starter
Forum
Replies
Last Post
JeepsAreForSpeed
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
08-04-2020 05:14 AM
savagess2546
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
08-31-2015 07:50 PM
JWB37
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
08-29-2015 12:03 PM
Cane
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
40
08-26-2015 12:08 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)