huntingman2706217

wondering what it is... thanks... oh and may as well double check what spline my 3.07 89 dana 30 is... thanks

winston427

Here ya go buddy....

Axles

Front Axles


Dana 30 high pinion - reverse cut - 27 spline, 1.16" diameter shafts, 7.13" ring gear - used 84-99 (some axles through 91 are vacuum disconnect, 92+ are non-disconnect, 89-95 with ABS have 5-297x u-joints, all 95+ have 5-297x u-joints, all others have 5-260x u-joints)



Dana 30 low pinion - standard cut - 27 spline, 1.16" diameter shafts, 7.13" ring gear, 5-297x u-joints - used 00-01


Rear Axles


Dana 35 non c-clip - 27 spline, 1.18" diameter shafts, 7.58" ring gear, 2.62" axle tube - used 84-89

Dana 35 c-clip - 27 spline, 1.18" diameter shafts, 7.58" ring gear, 2.62" axle tube - used 90-01

Chrysler 8.25 - 27 spline, 1.17" diameter shafts, 8.25" ring gear, 3" axle tube - used 91-96

Chrysler 8.25 - 29 spline, 1.21" diameter shafts, 8.25" ring gear, 3" axle tube - used 97-01

Dana 44 non c-clip - 30 spline, 1.31" diameter shafts, 8.5" ring gear, 2.75" axle tube - used 87-89 on some (not all) XJs equipped with towing package.


Note: Dana 35 axles sometimes referred to as Dana 35C - The "C" does not stand for c-clip. It stands for "custom" meaning it came from Dana unfinished.


Note: 8.25 axles - none of these axles were used on XJ's with ABS brakes. If you have ABS, you have the Dana 35. Without ABS you could have either axle. 8.25 axles are c-clip.

huntingman2706217

thats freakin awesome man... thanks! do you know what the case brake is for the D44? already know the D30... im sure i could find it but im lazy today... lol

PingPong

It really dont matter, cause you can buy Thick gears and use the lower carrier.

huntingman2706217

yeah i know... and if i buy new thats what ill do but my jeep truely is a cheap jeep... on everything i do i try and find used... running into thick gears used will never happen... lol... although i did find some standard for $75 used im thinking of picking up... guys gutting his jeep out... also has chromo front axles for D30 for $175 iwish i had the money to grab... lol

EndlessMtnFab

Carrier break on D44 is 3.73 down / 3.92 up




Joe