I wouldn't leave those tools sitting in the bucket free without some type of cover unless you don't mind having a crowbar or such ram through the back of your skull during an accident. Anything not secured can become a projectile during an accident.

 

I still have both sways with 3.5 in front and 4.5 in rear. Although i had front dico'd for a long time. Didnt mind it but as i like to "Drive it like I stole it" when i put it back on i could corner faster.

But i do have a huge locking tool box in back best thing i ever did. Some kind of cold air intake is awesome mine is homebrew.

 

X2. Your hammers will be missiles.
A 12-pound baby in a car going 40kph has 240 ft-lbs of momentum.*
What's that bucket of rusty tools weigh?

*http://news.google.com/newspapers?ni...g=5160,1369745

 

Trust me only take completly off the rear it drives fine with the rear off but with both off it is bad get or make quick disconnects for the front

 

I like how this "cheap mod" thread turned into a sway bar arguement thread. Here is a cheap mod that I did: cheap-o cool air intake off ebay for $35 plus a ram air hood scoop off ebay for $10. cut out a hole in my hood above the air intake, installed the hood scoop and some whire mesh to keep the rocks out. My under hood temps are nice and low when wheeling and my freeway mpgs went from 19 to 23 mpgs.

 

here is a pic:

 

This is the wrong section for this thread. Here's one that is already started.

https://www.cherokeeforum.com/f58/ho...13/#post431142

cheap jeep mods are the best!!!!!

 

Bore your throttle body u can do it cheap.
I run no sway bars an love it I do 75on highway no problem. I added poly lesfspring bushing an its way better.