I have a issue I took apart my leafs and put the AAl on and put the leafs back in the correct order I then put the leaf pack back in and now the center pin won't line up with the leaf that connects to the bushings its about a 1/4 of a inch off...I had no problems with the other side.

 

Jack it under the axle and try change the deflection on the spring or loosen the shackle?

 

Have you got the spring in the right direction?

 

thanks guys for the help! I used a ratchet strap and pulled the axle over and the center pin went into place! should of thought of that 2 hours ago.....

 

Glad you got it but were you talking about the spring pin that rests in the plate on top of the axle?

 

yes, sorry for not be a little more clear on that....

 

That is cool, accuracy really helps good luck on your next project.