I was replacing my TPS and noticed that the two of these fittings are ruined.
I went to the parts store and the guy was a Jeep buff, who told me that no parts store carries these parts, but I can find them online. I looked online and can find nearly-worthless diagrams with parts for sale, and the descriptions are equally worthless.

First, the one that joins these two bits.

It looks like this.

Mine is ripped in half.
I'm pretty sure this is a factory part.

The second is the one that joins these two parts.

It looks like this. (Excuse the electrical tape)

I'm not sure this is a factory part...
I need the factory part to replace it, though.
I've thought about putting a breather cap on the elbow on the valve cover, and sealing off the fitting on the airbox... But I think the breather cap would get very nasty very quickly.

Can anyone link me to a listing of these parts for sale?
I've come up empty.

 

New CCV lines come with those fittings. At least they should. You may be able to get the off somewhere like rockauto.com but your best bet is the dealership

 

That step down rubber coupling is so rare it makes hen's teeth look as common as roadside gravel. Dealer part, but you'll have to buy the whole tube assembly just to get that rubber coupling. OEM p/n 53030726 MSRP $15.00.

You can just cut a piece of hose to complete that connection at the air box.

Junk yard is an option for these parts.

People have tried that breather cap trick but failed.

 

www.rockauto.com may have them.

 

FML. Yeah, the Jeep buff who was working at the auto parts store told me that no store could get it for me, and that the dealership couldn't either.

And like I said, I think the breather cap would get nasty... Meaning saturated in oil.

Any site where I can order that step-down coupling? :/

 

Look at the post above.

 

^Sorry, I'm on the app, I didn't see it because I was writing a response to the first post.

Anyway, I just checked... RockAuto doesn't have it, unfortunately.

 

I guess I'll at least call the dealership.
Edit: Dealership's service department closes at 12... Have to call back Monday.

The hunt continues.

 

I gave you the part number of the rear tube assembly above. I can give you the part number of the front tube assembly if you need it.

 

Got mine from rock auto.

 

Curious: what did it cost, including shipping.

 

Less than 10 bucks. It included the tubes for the MAP sensor and CCV too. My rig is a 95 ZJ with the 4.0.

 

http://www.factorychryslerparts.com/...ssembly=552795
Would "2" be it?

I wish there was a description of exactly what it includes...

 

Don't use these people. I've heard some real;ly bad things about them.

 

Go to the parts store and get several pieces of hose that will fit inside each other to build a step down/up