thanks guys

from all the stuff said it sounds like its a freezing problem, but who knows, ill check it out an post my results to help the rest of you w/ problems out

Could be freezing - but it should do it at low speeds too. It may not at idle, but around town it should stop working too.

If it has the type of expansion valve with the copper tube and bulb, the bulb may not be placed right. it should go right into the evaporator coils where it can sense if it's getting too cold.
If it's been replaced it may not be in proper position to detect it's starting to freeze.

Refer to a service manual as to how it should be placed.

I had a similiar problem caused by a vacuum leak, you might want to check a few of your check valves.

My ac was cutting out or stopping on the highway when accelerating, cruise control was not working as well. Turned out the resevoir line was somehow off of the vaccuum resevoir under the pass. Headlight.

This is not correct - the magnetic field produced by the voltage is also dependant on the resistance of the conductor - which increases with heat cycles and heat. So an old coil which has undergone many heat cycles, will produce a weakened magnetic field as it its temperature increases...and get to the point where that magnetic field is not sufficient to pull in the clutch.