Connect test light to pos post on battery see if other wire got ground on clutch .

 

This plug doesent

 

Dont what ?

 

The bottom pic that plug doesnt have power but the top pic does have power

 

That goes to compressor I gather from switch if theres power to the last plug you pictured but not out of it put on new but connectors .

 

What about ac clutch relay switch it with o2 relay see if it works...http://autorepair.about.com/library/a/1f/bl515f.htm

 

Looks like there is other wires going to the compressor. Would I just slice these into the new conector?

 

First and for most check the freon then if u have over 30 psi on the low side. Then take a wire and jump the low presser switch if the compressor clutch clicks then replace the low presser switch, if not then jump the high presser switch if it click ur good if not let me know.

 

Read faster...lol...

 

Trying to get it to where it will click so I can charge it. Also iirc there was something about it not taking freon or something like that. How can I fix that

 

http://autorepair.about.com/library/a/1f/bl515f.htm

 

I have power there

 

If clutch don't engage when switch is by passed no since waisting money on Freon agreed .

 

where ?

 

Agreed and I have power at the relay for the constant power will check to see where I have power when the jeep is running but that will be tomorrow morning.