buyer advise
Thread Starter
Member
Joined: Oct 2009
Posts: 201
Likes: 0
Year: 1991
Model: Cherokee
Engine: 4.0 stock
buyer advise
I am looking to buy this but need some advice first?
The pretty cheap in alabama for one
the welded rear is what has me stopped and what about the sway bars? Would I need to buy anything to go with it like the sway bars and a new rear to make it a DD or would i be safe?
I have a 1990 Cherokee 4x4 auto, Black and Silver, with 4:11's, 32's, new brakes, rancho RS5000's, Rough Country steering stabilizer, external tranny cooler, trail lights, welded rear, 3" lift, fenders cut, 94 up cooling system, no carpet and the driver seat is broken but have the complete interior out of a 2000 model that hasen't been installed that goes with it. Optima red top battery. No sway bars. New plugs,wires, distributor ect. 1600 obo
the welded rear is what has me stopped and what about the sway bars? Would I need to buy anything to go with it like the sway bars and a new rear to make it a DD or would i be safe?
Seasoned Member
Joined: Aug 2010
Posts: 462
Likes: 1
From: salt lake city, utah
Year: 1990
Model: Cherokee
Engine: 4.0
but overall sound like a good buy, just get a front sway bar and some quick disco's. but about the rear end it just depends on who welded it and if they knew what they were they doin
Seasoned Member
Joined: Aug 2010
Posts: 462
Likes: 1
From: salt lake city, utah
Year: 1990
Model: Cherokee
Engine: 4.0
you dont need quick disconnects but if you go wheelin at all you will want them, basickly it disconnects the front sway bar for more flex, and the worse that will happen with the rear end is the welds will break most likely causing damage to your rear end, if your using it as a dd i'd say grab a cheap jy rear that has not been welded
Thread Starter
Member
Joined: Oct 2009
Posts: 201
Likes: 0
Year: 1991
Model: Cherokee
Engine: 4.0 stock
ok thanks From what you said I got my groove I would take if I am able to talk him a few hundred.
Ill get the front sway and I dont want quick discos cause they wear to easy, Im not worried about flex as much as staying on the road and just mudding. Also If I was to get a good rear and not a cheapo what would I be looking for Years and models.
For me information is success.
Ill get the front sway and I dont want quick discos cause they wear to easy, Im not worried about flex as much as staying on the road and just mudding. Also If I was to get a good rear and not a cheapo what would I be looking for Years and models.
For me information is success.
Trending Topics
Seasoned Member
Joined: Aug 2010
Posts: 462
Likes: 1
From: salt lake city, utah
Year: 1990
Model: Cherokee
Engine: 4.0
if its the same as my 90 i believe its the dana 35. not sure of the years though but make sure you have the same gearing as the front, you'll tear your jeep apart if they have different gears lol
