Burnt wiring harness please help
#1
CF Veteran
Thread Starter
Join Date: May 2012
Location: Wilmington,NC
Posts: 3,004
Likes: 0
Received 1 Like
on
1 Post
Year: 1989
Model: Cherokee
Engine: 4.0
Burnt wiring harness please help
Okay guys here's what happened the person that put the battery cables on my Jeep last time used to f****** negative cables long story short I put a new battery in it today and it fried the f****** harness cuz I couldn't tell which one was ground and which one was not with it being dark out. My question is what is the easiest way to fix this should I just order a complete wiring harness for the engine compartment of my Jeep and what daemon should I expect to find when I actually start into the repair any and all help is much appreciated would like to get my girl running again asap
#2
Member
Join Date: Sep 2013
Location: Thurston County WA.
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0 HO
first: are the wires actually burnt and melted?
Second: if they arent then check all the fuses, those will most likely all be bad
Third: you may have fried the ECU and everyother sensor.
Second: if they arent then check all the fuses, those will most likely all be bad
Third: you may have fried the ECU and everyother sensor.
#4
Member
Join Date: Sep 2013
Location: Thurston County WA.
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0 HO
are just the big main wires off the battery the ones that got burnt? or is it all the wires at the junction mounted on the fender?
#6
Senior Member
Join Date: Jun 2009
Location: Shorewood, Il
Posts: 600
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
Engine: inline 6 4.0L
hopefully the Pictures show up but part of mine fried too and Probably wont help too much in your situation but I soldered mine back together and took this connection out completely. gotta love Chrysler's wiring...
Trending Topics
#10
CF Veteran
Thread Starter
Join Date: May 2012
Location: Wilmington,NC
Posts: 3,004
Likes: 0
Received 1 Like
on
1 Post
Year: 1989
Model: Cherokee
Engine: 4.0
Alright guys sorry for the late reply haven't been home during the day long enough to be able to inspect the Jeep it appears that it's the small positive cable that runs to the junction connection on the fender is melted and burnt I'm not sure about any wires going to the relays. relays I pulled all them they didn't appear to be burnt I do have a picture for yall of the melted burnt wire that I could find if anyone knows how to get the relay junction of the fender please let me know so I can get it off inspect there as well
Attachment 232504
Attachment 232503
Attachment 232504
Attachment 232503
Last edited by Slim357; 02-25-2014 at 01:14 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Zerocyde
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
45
06-29-2022 05:51 PM
NM-XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
10-23-2018 04:21 PM
moish
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
09-19-2015 11:55 AM
Blawillis
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-13-2015 01:07 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)