Building sliders...is it worth the effort over buying?
#1
Seasoned Member
Thread Starter
Join Date: Feb 2009
Location: OKC, OK
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L
Building sliders...is it worth the effort over buying?
I have been lookin at everyones pics of sliders (and websites like JRC and AJ) and I was wondering...is it worth the time and effort building them or just go ahead and buy them?
They don't look very difficult to fab up...but then...that is for just the plain lookin ones. The fancy ones with the sweet round tubing on the sides (for stepping on) looks a bit more difficult.
How do you think I would spend in buying steel to make them? Ball park idea?
Just curious of your thoughts.....
They don't look very difficult to fab up...but then...that is for just the plain lookin ones. The fancy ones with the sweet round tubing on the sides (for stepping on) looks a bit more difficult.
How do you think I would spend in buying steel to make them? Ball park idea?
Just curious of your thoughts.....
Last edited by bsljacques; 03-05-2009 at 12:24 PM. Reason: spelling
#2
CF Veteran
Join Date: Nov 2008
Location: Paso Robles Ca
Posts: 2,473
Likes: 0
Received 9 Likes
on
9 Posts
Year: 1991
Model: Cherokee
Engine: 4.0
I have been lookin at everyones pics of sliders (and websites like JRC and AJ) and I was wondering...is it worth the time and effort building them or just go ahead and buy them?
They don't look very difficult to fab up...but then...that is for just the plain lookin ones. The fancy ones with the sweet round tubing on the sides (for stepping on) looks a bit more difficult.
How do you think I would spend in buying steel to make them? Ball park idea?
Just curious of your thoughts.....
They don't look very difficult to fab up...but then...that is for just the plain lookin ones. The fancy ones with the sweet round tubing on the sides (for stepping on) looks a bit more difficult.
How do you think I would spend in buying steel to make them? Ball park idea?
Just curious of your thoughts.....
depending on what equipment you have it may cost more
fab it up your self is something you do for fun and self accomplishment
#3
Seasoned Member
Thread Starter
Join Date: Feb 2009
Location: OKC, OK
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L
Well......I guess I should just do it myself...mig welder and cutoff saw are needing a workout anyway...and I think the cost of steel is getting reasonable but I will have to check. Just need to crawl under and take some measurements. Just not sure I can make the neat looking round tube parts myself.....but I will see if anyone local can make some bends for me.
I am thinking of modeling them after JCR offroads superslider.
I am thinking of modeling them after JCR offroads superslider.
#4
CF Veteran
Join Date: Nov 2008
Location: Paso Robles Ca
Posts: 2,473
Likes: 0
Received 9 Likes
on
9 Posts
Year: 1991
Model: Cherokee
Engine: 4.0
Well......I guess I should just do it myself...mig welder and cutoff saw are needing a workout anyway...and I think the cost of steel is getting reasonable but I will have to check. Just need to crawl under and take some measurements. Just not sure I can make the neat looking round tube parts myself.....but I will see if anyone local can make some bends for me.
I am thinking of modeling them after JCR offroads superslider.
I am thinking of modeling them after JCR offroads superslider.
not I bolted it on
#5
Do you hear banjos?
I'm going to be building mine. I'd much rather build the stuff, then pay, A LOT, for someone else to do what I could do, possibly better!! I say build them, especially if you have the equipment!!
#6
Member
i am going to be building my own soon, i think if you have a welder and a little know how.. build it yourself but if you want the fancy bent tubing, i have been playing around with a propane torch and bending metal around homemade dyes such as a rim, paint can packed with dirt clamped to a table, etc.. i have been able to make some pretty good bends and am going to try to make a set of sliders like this.
I say build them your self, even if you keep them square and simple they will look good
I say build them your self, even if you keep them square and simple they will look good
Trending Topics
#8
Seasoned Member
Thread Starter
Join Date: Feb 2009
Location: OKC, OK
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L
Yeah....I think you all are right....I have the tools and the know how...and even some time! I will hit the local steel supply place in my town and see if he has some 2x3 3/16 box tube and 1/4 plate steel...I think I have the rest of what I need other than the round tubing.
#9
Seasoned Member
Join Date: Dec 2008
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
Steel isn't cheap. I'll tell you that. I bought my sliders from AJ but I'm building my tube fenders and some other stuff. Price it out first and see what the cost difference is. It would be more cost effective to spend $240 and get a set of AJ's if you don't have a welder, tube bender, notcher, plasma cutter and grinder.
#10
Seasoned Member
Thread Starter
Join Date: Feb 2009
Location: OKC, OK
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L
Steel isn't cheap. I'll tell you that. I bought my sliders from AJ but I'm building my tube fenders and some other stuff. Price it out first and see what the cost difference is. It would be more cost effective to spend $240 and get a set of AJ's if you don't have a welder, tube bender, notcher, plasma cutter and grinder.
#11
Seasoned Member
Join Date: Apr 2008
Location: Grand Junction, Colorado
Posts: 377
Likes: 0
Received 2 Likes
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0L
Steel isn't cheap. I'll tell you that. I bought my sliders from AJ but I'm building my tube fenders and some other stuff. Price it out first and see what the cost difference is. It would be more cost effective to spend $240 and get a set of AJ's if you don't have a welder, tube bender, notcher, plasma cutter and grinder.
x2 I have been toying with the idea of building my own. I called the Steel supply place in town a couple of days ago and it was going to be almost $200 for everything that I wanted to build mine. Then I would have to find someone to let me borrow a bender to bend up my outer tubes. Instead I put in an order to AJ this morning, for a set of super rails!
#12
Senior Member
Join Date: May 2008
Location: Michigan
Posts: 814
Likes: 0
Received 7 Likes
on
7 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
If you have the tools to build them your self it's pretty easy. One thing I learned is the the body on an XJ tapers out about an inch to an inch and a half from front to back. Your rear mounts need to be longer than the front to make the rails sit even front to back.
Heres a picture of the ones I built, I cut my rusty rockers off and built these. If I were going to buy a set JCR all the way!!!!
Heres a picture of the ones I built, I cut my rusty rockers off and built these. If I were going to buy a set JCR all the way!!!!
Last edited by BLKXJ 96; 03-05-2009 at 08:05 PM.
#14
CF Veteran
Join Date: Aug 2008
Location: palm desert,ca
Posts: 1,313
Likes: 0
Received 1 Like
on
1 Post
Year: 1987
Model: Wagoneer
Engine: 4.0
If you have the tools to build them your self it's pretty easy. One thing I learned is the the body on an XJ tapers out about an inch to an inch and a half from front to back. Your rear mounts need to be longer than the front to make the rails sit even front to back.
Heres a picture of the ones I built, I cut my rusty rockers off and built these. If I were going to buy a set JCR all the way!!!!
Heres a picture of the ones I built, I cut my rusty rockers off and built these. If I were going to buy a set JCR all the way!!!!
#15
Member
x2 I have been toying with the idea of building my own. I called the Steel supply place in town a couple of days ago and it was going to be almost $200 for everything that I wanted to build mine. Then I would have to find someone to let me borrow a bender to bend up my outer tubes. Instead I put in an order to AJ this morning, for a set of super rails!
dang that is steep! what kinda design were you thinking of making?