Budget Builds: What Junkyard Parts Will Fit Cherokee?
Senior Member
Joined: Dec 2010
Posts: 1,358
Likes: 0
From: Orlando-Miami
Year: 1993
Model: Cherokee
Engine: 4.0 HO
The chevy ones are the ones I'm talking about. They are bolt on. The bushings stick out like .5 of an inch on both side. They have to be trimmed down a bit, nothing else, its just rubber (she didn't say that). I use them with great results. They flex alright too.
Member
Joined: Jan 2012
Posts: 156
Likes: 0
From: Medford OR
Year: 1990
Model: Cherokee
Engine: 4.0 6cyl
Are those the stock chevy shackles? an is that jeep lifted as well? Or do you have bastard pack on it?
Senior Member
Joined: Dec 2010
Posts: 773
Likes: 1
Model: Cherokee
Did my s-10 bastard pack Today. Used the xj main all 3 s10 leafs minus the overload lifted 4-4.5 just like it was suppose to.
I recomend that setup to anyone without reservations to do an inexpensive 4 to 4.5 lift.
I recomend that setup to anyone without reservations to do an inexpensive 4 to 4.5 lift.
Member
Joined: Aug 2011
Posts: 113
Likes: 0
From: Mesa, AZ
Year: 1993
Model: Cherokee
Engine: 4.0 liter High Output
Originally Posted by James P
Did my s-10 bastard pack Today. Used the xj main all 3 s10 leafs minus the overload lifted 4-4.5 just like it was suppose to.
<img src="https://www.cherokeeforum.com/attachment.php?attachmentid=89660"/>
I recomend that setup to anyone without reservations to do an inexpensive 4 to 4.5 lift.
<img src="https://www.cherokeeforum.com/attachment.php?attachmentid=89660"/>
I recomend that setup to anyone without reservations to do an inexpensive 4 to 4.5 lift.
Senior Member
Joined: Dec 2010
Posts: 773
Likes: 1
Model: Cherokee
Originally Posted by Richieb9
So glad you posted this. I bought my s10 leafs and that helper looks pretty stout so i was wondering what kind of lift you get if you put all three without the helper. and i need 4.5 inches to match my front.
Member
Joined: Jan 2012
Posts: 156
Likes: 0
From: Medford OR
Year: 1990
Model: Cherokee
Engine: 4.0 6cyl
Did my s-10 bastard pack Today. Used the xj main all 3 s10 leafs minus the overload lifted 4-4.5 just like it was suppose to.
Attachment 89660
I recomend that setup to anyone without reservations to do an inexpensive 4 to 4.5 lift.
Attachment 89660
I recomend that setup to anyone without reservations to do an inexpensive 4 to 4.5 lift.
Senior Member
Joined: Dec 2010
Posts: 773
Likes: 1
Model: Cherokee
Originally Posted by Sorenabel
Looks reallly good!! In the pic did you already put new longer shocks on front an back to?
Made them from rear sway bar mounts and 1" bolts. ; )
Member
Joined: Jan 2012
Posts: 156
Likes: 0
From: Medford OR
Year: 1990
Model: Cherokee
Engine: 4.0 6cyl
Yes ranchos with homebrew adapters. LOL.
Attachment 89726
Made them from rear sway bar mounts and 1" bolts. ; )
Attachment 89726
Made them from rear sway bar mounts and 1" bolts. ; )
Member
Joined: Jan 2012
Posts: 156
Likes: 0
From: Medford OR
Year: 1990
Model: Cherokee
Engine: 4.0 6cyl
Did my s-10 bastard pack Today. Used the xj main all 3 s10 leafs minus the overload lifted 4-4.5 just like it was suppose to.
Attachment 89660
I recomend that setup to anyone without reservations to do an inexpensive 4 to 4.5 lift.
Attachment 89660
I recomend that setup to anyone without reservations to do an inexpensive 4 to 4.5 lift.
Member
Joined: Jan 2012
Posts: 156
Likes: 0
From: Medford OR
Year: 1990
Model: Cherokee
Engine: 4.0 6cyl
I have a craftman gasless wire feed welder 120v that sucks. Just got it last year, but it doesnt weld thick metal well at all, it doesnt get hot enough basically. I should of just got a lincoln..
