Troth

So my buddy helped me change my brake pads about 4 months ago and everything was good for a while but not long after it started pulsing really bad like when i slow down at an intersections it makes your head bob forward and back. and in the morning when i back out if i apply the breaks they will make like a chirp noise and tures will lock then break free and be ok. especially when the breaks warm up then it gets better. my brakes have always pusled but I had resurfacing done about a year ago.

any ideas?

Troth

and the chrp noise is not the same as the sound when your brake pads are worn

Abovetimberline

From your description it appears you understand what causes pulsation in your brakes. I would replace the rotore,pads and make sure your calipers are not causing uneven wear of the pads,I would also check the rear brakes,they can cause it also.

Troth

what would cause the locking up and chirping at frst. It was a big pain to do it the first time and I know that if I go to an auto place they charge like crazy