bored out throttle body
#3
Senior Member
Thread Starter
Join Date: Dec 2008
Location: Punxsutawney Pennsylvania
Posts: 831
Likes: 0
Received 1 Like
on
1 Post
Year: 1988
Model: Cherokee
Engine: Renix 4.0 I6
thanks for the info... i have a boring machine at my shop so im gonna take it there and see what i can do.. any tips on doing this???
#6
Seasoned Member
Join Date: Dec 2008
Location: rehoboth, MASS
Posts: 498
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
http://www.go.jeep-xj.info/HowtoTBboring.htm might be something for you to read
but the top half of the TB is 60mm. and so is the butterfly valve, so if u wanted to bore out to 62mm you would to have to make a new butterfly valve, i think it is called a throttle plate, with the edges feathered correctly. For the amount of work involved and the small amount of gains you're probably best option is to go 60mm through the bottom half to match the top. hve fun
but the top half of the TB is 60mm. and so is the butterfly valve, so if u wanted to bore out to 62mm you would to have to make a new butterfly valve, i think it is called a throttle plate, with the edges feathered correctly. For the amount of work involved and the small amount of gains you're probably best option is to go 60mm through the bottom half to match the top. hve fun
Last edited by xer0; 02-23-2009 at 08:53 PM.
Thread
Thread Starter
Forum
Replies
Last Post
cpnwrench
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
02-15-2024 08:09 AM
libengan
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
11-06-2015 09:16 AM
MightyMouse8
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
10-08-2015 08:57 AM
zumer715
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
10-03-2015 07:07 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)