Hello everybody,

Proud new owner of a 2001 Cherokee Limited. Not a car guy, but trying to learn.

Anyway, in the process of trouble-shooting my non-operating blower motor I discovered that the electrical connector (nomenclature from the Haynes manual) has melted/been severely damage. The fan itself had also been shredded into three or four pieces. I was able to get the old connector seated on a new blower motor but it's still not working. I suspected the fried electrical connector is at least somewhat responsible for the failure.

I am having trouble finding a replacement electrical connector (the part that plugs into the blower motor itself). Plenty of hits on resistors/cables but nothing showing up on amazon or google for the electrical connector to the blower. Any advice?

Thanks,
Adam

 

I think this has a wiring harness you can use part of and it should plug into the blower motor . It is for a grand cherokee but it has wiring that plus into the motor
https://www.ebay.com/itm/26377310238....c101506.m1851