My xj is a dd so I would like to have blinkereven though it hasnt had any since I have owned her... I just replaced the column with one in ALOT better condition than mine... the hazard flashed will click nut blinker flashed will not so I switched them and still nothing in blinker or hazard... what do you guys think would most likely be the problem

 

"the hazard flashed will click nut blinker flashed will not so I switched them and still nothing in blinker or hazard"

This part is a little blurry

 

Haha... Sry stupid predictive text... my hazard flasher will click so I switched it with my blinker to see if either one would work and neither one of them would work...

 

Are all the bulbs good?

 

The lights in the dash don't blink or the flasher won't click... or are you saying its like an online issue... I can check

 

Are all the exterior bulbs good (do they at least light up?).

 

Negative... bulbs appear to be good though

 

Start with tracing all the lighting circuits and figure out what the issue is with those (bad connector, missing or loose ground, etc.) Without enough amperage draw no way the flashers will operate, they are simply a self resetting circuit breaker.

 

I officially have blinkers on all four corners... I bought some tailights from the pap last week and they just cut the wires and left the sockets in the tail lamps so I cut some of the sockets off and sliced them into my wires and so now I got blinkers.... got another problem though... my jeep idles really rough... it jumps anywhere from 600rpms to 1600 rpms while idleing... does it sound like a vacuum leak or something worse?