Ok so i converted my comanche to a 4x4 using a 97 wrangler tranny and i need to bleed the slave but there is no bleeder valve on mine and auto zone shows it not coming with one. dose anyone have one of these or now where i can get one?

 

from what I understand you need to remove the slave cylinder first, then bench bleed it and reinstall. Hopefully this link helps.

http://www.quadratec.com/jeep_knowle...rticle-117.htm

My xj has a bleed valve so I was able to do it on the vehicle, but my Haynes manual has intructions for bleeding an external slave, similar to the link I included.

If you don't already have a Haynes manual pick one up! It will pay for itself the first time you use it.

 

X2

 

From someone who just went through all of this. I would can tell you it is better to just buy the pre bleed master and slave combo. These are a sealed unit and air getting into the system shows the it failed some where. Can you bleed the slave, yes but It is a temp fix.