How do I bleed the master and slave cylinder? I have the whole thing out and have been pumping the slave and it won't stop bubbling.

 

there should be a bleeder valve on the left side of the bellhousing where you can bleed it.

 

I tried that but it loses all pressure.

 

Anyone?

 

No one knows any tricks o bleeding the clutch hydraulics?

 

A friend of mine loaned me a slick setup using a pressurized bottle, with a hose leading to a sealed cap that went on the master cylinder. Filled the bottle with brake fluid, hooked up the cap, pressurized the bottle and then climed under the Jeep and loosened the bleeder screw until all the air came out of the lines.